Skip to main content KYOCERA KYOCERA Connector Products Global THE NEW VALUE FRONTIER
Home      News      Products      About   
Series Search
Product Type
FPC/FFC Connectors
For High-speed signal transmission
 AV equipment
6882 Series
0.2mm pitch
0.3mm pitch
0.4mm pitch
0.5mm pitch
0.8mm pitch
1.0mm pitch
1.25mm pitch
Board to Board Connectors
Memory Card Connectors
Interface Connectors
Wire to Wire/Board Connectors
Card Edge Connectors
Back Plane Connectors
Automotive Connectors
Shunt Connectors
Power Supply Connectors
Power Terminals
Press-Fit Pin
Shield Lock
Application Tool
KYOCERA Corporation
Products > Product Type > FPC/FFC Connectors > 6882 Series  Japanese Chinese

6882 Series

  0.5mmPitch ZIF Right Angle SMT One-touch-flip lock Type

Series 6882
No. of Positions 7 to 61
Profile Height 2.1mm
Contact Location Top contact
Pitch 0.5mm
Rated Current AC/DC 0.4A
Rated Voltage AC/DC 50V
Withstanding Voltage AC 200Vrms/min.
Applicable FPC thickness 0.3mm
Characteristic Impedance
(Our actual measurement)
(Tr: 70ps)
6882 Series

Series 6882 FPC/FFC connector has contacts with proprietary-adjusted impedance, it is capable of the maximum speed of 3.75Gbps defined by V-by-One®HS* that is one of the next-generation interface for flat-screen TVs. It is ready for not only FPCs but also shielded and impedance-adjusted FFCs. Improvement in the differential impedance characteristics supports high-speed differential transmission in the connection in drivers such as DVD players and recorders and car navigation systems as well as flat-screen TVs

* V-by-One®HS:
An interface for the next-generation high-speed signals developed by THine Electronics, Inc. V-by-One® is a registered trademark of THine Electronics, Inc.

(1) Displacement in alignment of contacting points and FPC conductors caused by aslant insertion of FPC/FFC is prevented with the combination of the metal locking device and a notched FPC/FFC, which realizes the robust structure that is tolerant of tensile strength and achieves the secure connection. Also the workability improves in your production line because an FPC/FFC can be held (temporarily) in the connector before the actuator closed and locked.
(2) The back-flip lock type is adopted, in which the actuator is located on the opposite side of the FPC/FFC entry slot, by which the closed and locked actuator is highly resistant to an external stress caused when the FPC/FFC is laid out.
(3) Exclusive contacts for connection of signals and groundings (GND) achieve highly accurate impedance match. The array of contacts is arranged for suiting to a pattern layout on your printed circuit board.
(4) Packaged in tape and reel: 1,000 pieces/reel.
(5) RoHS compliant and Halogen-free product.
(6) Contact Material: Copper alloy
(7) Insulator Material: Heat resistance plastic
(8) Operating Temperature Range: -40 to +85°C
(9) Plating Specifications
Plating Code Contact Area Tail Area Metal tab RoHS Compliance
846+ Au Au Au Yes
Inquiries about this page

FPC/FFC Product Search

 Related link
6882 Series Catalog Drawing
Pin counts?
Check the Parts No. of Availability products, RoHS condition or Minimum packaging quantity.

Environmental Correspondence

Member Site
Top of page
Products > Product Type > FPC/FFC Connectors > 6882 Series 
Contact us      Terms of use      Privacy      Sitemap     
Copyright, KYOCERA Connector Products Corporation. All rights reserved.