Skip to main content KYOCERA KYOCERA Connector Products Global THE NEW VALUE FRONTIER
Home      News      Products      About   
Series Search
Product Type
FPC/FFC Connectors
For High-speed signal transmission
 AV equipment
6804 Series
0.2mm pitch
0.3mm pitch
0.4mm pitch
0.5mm pitch
0.8mm pitch
1.0mm pitch
1.25mm pitch
Board to Board Connectors
Memory Card Connectors
Interface Connectors
Wire to Wire/Board Connectors
Card Edge Connectors
Back Plane Connectors
Automotive Connectors
Shunt Connectors
Power Supply Connectors
Power Terminals
Press-Fit Pin
Shield Lock
Application Tool
KYOCERA Corporation
Products > Product Type > FPC/FFC Connectors > 6804 Series  Japanese Chinese

6804 Series

  0.5mmPitch ZIF Right Angle SMT One-touch-flip lock Type

Series 6804
No. of Positions 40 to 60
Profile Height 2.2mm
Contact Location Bottom contact
Pitch 0.5mm
Rated Current DC 0.5A
Rated Voltage DC 50V
Withstanding Voltage AC 200Vrms/min.
Applicable FPC thickness 0.3mm
Characteristic Impedance
(Our actual measurement)
(Tr: 200ps)
6804 Series

Series 6804 connector is compliant with V-by-One®HS* that is the next generation interface for flat TV's, which enables the high speed transmission at the maximum speed of 3.75Gbps. With its compactness of 3.95mm deep and low profile of 2.2mm high on the board, it fits with both of Gate Source boards and Timing Control boards. With the ground pins layout on both side ends, shielded FFC’s are also usable, which enforces the countervailing measure against EMI.

* V-by-One®HS:
An interface for the next-generation high-speed signals developed by THine Electronics, Inc. V-by-One® is a registered trademark of THine Electronics, Inc.

(1) It is compliant with the highest speed of 3.75Gbps deifned by V-by-One®HS*, one of the next generation interfaces for flat TV’s. It is used with shielded FFC’s and non-shielded FPC's/FFC's.
(2) It is space-saving with its compactness of 3.95mm deep and low profile of 2.2mm high on the board, which fits with both of Gate Source boards and Timing Control boards.
(3) In combination with notched FPC's/FFC's, shifting in contacting position caused by an aslant insertion is prevented and the structure gets tougher against a tensile force, which achieves the secure connection. The workability is improved because an FPC/FFC is held before fully inserted (held tentatively).
(4) Packaged in tape and reel: 4,000 pieces/reel.
(5) RoHS compliant and Halogen-free product.
(6) Contact Material: Copper alloy
(7) Insulator Material: Heat resistance plastic
(8) Operating Temperature Range: -40 to +85°C
(9) Plating Specifications
Plating Code Contact Area Tail Area GND contact
Metal tab
RoHS Compliance
846+ Au Au Sn-Cu Yes
Inquiries about this page

FPC/FFC Product Search

 Related link
6804 Series Catalog Drawing
Pin counts?
Check the Parts No. of Availability products, RoHS condition or Minimum packaging quantity.

Environmental Correspondence

Member Site
Top of page
Products > Product Type > FPC/FFC Connectors > 6804 Series 
Contact us      Terms of use      Privacy      Sitemap     
Copyright, KYOCERA Connector Products Corporation. All rights reserved.