Skip to main content KYOCERA KYOCERA Connector Products Global THE NEW VALUE FRONTIER
Home      News      Products      About   
Series Search
Product Type
FPC/FFC Connectors
Board to Board Connectors
0.35mm pitch
0.4mm pitch
0.5mm pitch
0.635mm pitch
0.8mm pitch
1.0mm pitch
1.25mm pitch
1.27mm pitch
2.0mm pitch
2.54mm pitch
LED Connectors
9608 Series
Memory Card Connectors
Interface Connectors
Wire to Wire/Board Connectors
Card Edge Connectors
Back Plane Connectors
Automotive Connectors
Shunt Connectors
Power Supply Connectors
Power Terminals
Press-Fit Pin
Shield Lock
Application Tool
KYOCERA Corporation
Products > Product Type > Board to Board Connectors > 9608 Series  Japanese Chinese

9608 Series

  2.4mm Pitch LED light and LED backlight Connectors

Series 9608
No. of Positions 2
Pitch 2.4mm
Stack. Height JOINT: 1.4mm
JUMPER: 1.4mm
Wire to Board: 1.85mm
Rated Current JOINT: DC 3A
Wire to Board: AWG#24, 22: DC 3A
AWG#26: DC 1A
Rated Voltage DC 250V
Withstanding Voltage AC 500Vrms/min.
9608 Series

Series 9608 connector is for LED light and LED backlight, which achieved 1.4mm of mating height so that the connectors would not hamper distribution of luminous intensity practically. Three types, Ĺ«OINT (relay) typeŽ” connects modularized boards, Ĺ«UMPER (short-circuiting) typeŽ” supports a loop in an electrical circuit at the end of the circuit, and Ÿire to Board typeŽ” is for connection to a power supply unit, are available.

(1) The connector used around LEDs is designed so that they would not hamper distribution of luminous intensity, while achieving 1.4mm of the mating height.
(2) Plug connectors mounted on printed circuit boards are of the same shape in all types, which contributes the workability in the mounting process.
Mating directions are well considered for their purpose; connectors of JOINT and JUMPER types are mated vertically, and the ones of Wire to Board type are horizontally.
(3) The floating structure is adopted in JOINT type, that absorbs misalignment of ±0.1mm on the long side of respective connectors (±0.2mm in total between the connected boards) to improve the contact reliability.
(4) The type of 1.2mm spacing between contacts besides 2.4mm spacing and types of other number of positions are available.
(4) Contact Material: Copper Alloy
(2) Insulator Material: Thermo plastic
(3) Operating Temperature Range: -40 to +105°C
(4) Plating Specifications
Plating Code Contact Area Plating Area RoHS Compliance
829+ Au(0.1 to 0.3µm Min.)
Au(0.03 to 0.1µm Min.)
868+ Au(0.1 to 0.3µm Min.)
Au(0.03 to 0.1µm Min.)
*868+: Nickel barrier
Inquiries about this page

 Related link
9608 Series Catalog Drawing
Check the Parts No. of Availability products, RoHS condition or Minimum packaging quantity.

Environmental Correspondence

Member Site
Top of page
Products > Product Type > Board to Board Connectors > 9608 Series 
Contact us      Terms of use      Privacy      Sitemap     
Copyright, KYOCERA Connector Products Corporation