| Series |
8073 |
| No. of Positions |
35,42 |
| Pitch |
2.0mm |
| Rated Current |
AC/DC 1A |
| Rated Voltage |
AC/DC 250V |
| Withstanding Voltage |
750Vrms/min. |
| Applicable wire sizes |
AWG #26 to 30 |
|
|
 |
 |
 Outline |
|
Series 8073 is a cable connector designed to catch the signal emitted from the back plane of connector effectively. Shielded type for EMI and EMC control and Non-Shielded type are available. Connector Products's original design concept enables the expansion of position in multiples of five by stacking each unit of five position modules.
Consequently this structure can also achieve the free combination of circuits in the field between the concentrating side and the branching side in multiples of five.
In addition, the combination of this connector with our original two cored coaxial cable designed for high-speed transmission facilitates the conversion of current entangled status by the one-cored coaxial cables into the simple arrangement of cables resulting in the easy maintenance of equipment. |
| Features |
|
| (1) |
Contact Material: Copper Alloy |
| (2) |
Insulator Material: Thermo plastic |
| (3) |
Operating Temperature Range: -55 to +85°C |
| (4) |
Plating Specifications |
| Plating Code |
Contact Area |
Crimping Area |
RoHS Compliance |
| suffix "+" |
Au(0.1µm Min.) /
Au(0.1µm Min.) ,Pd-Ni |
Sn-Cu /
Au(0.03µm Min.) |
Yes |
| No suffix |
Au(0.1µm Min.) /
Au(0.1µm Min.) ,Pd-Ni |
Sn-Pb |
No |
|
|
|
| Related link |
|
|
|
|
Japanese
Top of page