Series 6804 0.5mm pitch FPC/FFC Connector supporting high-speed signal transmission is released
|
 |
 |
 |
Product Name |
 |
Series 6804 0.5mm pitch FPC/FFC Connector
 
 |
Outline |
 |
| Series 6804 connector is compliant with V-by-One®HS* that is the next generation interface for flat TV’s,
which enables the high speed transmission at the maximum speed of 3.75Gbps.
With its compactness of 3.95mm deep and low profile of 2.2mm high on the board,
it fits with both of Gate Source boards and Timing Control boards.
With the ground pins layout on both side ends, shielded FFC’s are also usable,
which enforces the countervailing measure against EMI.
|
Features |
 |
| 1. |
It is compliant with the highest speed of 3.75Gbps deifned by V-by-One®HS*, one of the next generation interfaces for flat TV’s. It is used with shielded FFC’s and non-shielded FPC’s/FFC’s. |
| 2. |
It is space-saving with its compactness of 3.95mm deep and low profile of 2.2mm high on the board, which fits with both of Gate Source boards and Timing Control boards. |
| 3. |
In combination with notched FPC’s/FFC’s, shifting in contacting position caused by an aslant insertion is prevented and the structure gets tougher against a tensile force, which achieves the secure connection. The workability is improved because an FPC/FFC is held before fully inserted (held tentatively).
|
| 4. |
Packaged in tape and reel: 4,000 pieces/reel. |
| 5. |
RoHS compliant and Halogen-free product. |
* V-by-One®HS: An interface for the next-generation high-speed signals developed by THine Electronics, Inc. V-by-One® is a registered trademark of THine Electronics, Inc.
Specification |
 |
| No. of Positions |
40, 60 Pos. (Contact us for other pin counts.) |
| Product Height |
2.2mm |
| Pitch |
0.5mm |
| Contact Position |
Bottom |
| Rated Current |
DC 0.5A |
| Rated Voltage |
DC 50V |
| D.W.Voltage |
AC 200Vrms/min. |
| Characteristic Impedance |
100Ω±15% (Tr: 200ps) |
| Applicable FPC/FFC Thickness |
0.3 +0.05/-0.03mm |
| Contact Material |
Copper alloy |
| Insulator Material |
Heat resistant plastic |
|
|
 |
|