Skip to main content KYOCERA KYOCERA Connector Products Global THE NEW VALUE FRONTIER
Home      News      Products      About   
News Release > Series 9608 / 9609 lowest* profile in the industry for LED light and LED backlight is released
The news releases herein are released for a media organization, and are current on the date of publication.


Series 9608 / 9609 lowest* profile in the industry for LED light and LED backlight is released

Product Name
Series 9608 / 9609 for LED light and LED backlight


Series 9608 (Left), Series 9609 (Right)

Outline
Series 9608 / 9609 connectors are for LED light and LED backlight, which achieved 1.4mm of the industry-lowest* mating height so that the connectors would not hamper distribution of luminous intensity practically.

-Series 9608-
Three types, “JOINT (relay) type” connects modularized boards, “JUMPER (short-circuiting) type” supports a loop in an electrical circuit at the end of the circuit, and “Wire to Board type” is for connection to a power supply unit, are available.

-Series 9609-
This is a space saving type connector that could be mounted on a slim board derived from the weight saving of lighting fixtures. Two types, “JOINT (relay) type” connects modularized boards and “Wire to Board type” is for connection to a power supply unit, are available.

Features
-Serirs 9608-
1.

The connector used around LEDs is designed so that they would not hamper distribution of luminous intensity, while achieving 1.4mm of the mating height, the lowest* in the industry.

2.

Plug connectors mounted on printed circuit boards are of the same shape in all types, which contributes the workability in the mounting process. Mating directions are well considered for their purpose; connectors of JOINT and JUMPER types are mated vertically, and the ones of Wire to Board type are horizontally.

3.

The floating structure is adopted in JOINT type, that absorbs misalignment of ±0.1mm on the long side of respective connectors (±0.1mm in total between the connected boards) to improve the contact reliability.

4.

The type of 1.2mm spacing between contacts besides 2.4mm spacing and types of other number of positions are available.

5. Packaged in tape and reel: 2,000 pieces/reel (Plug connectors)
6. RoHS compliant product

-Serirs 9609-
1.

The connector used around LEDs is designed so that they would not hamper distribution of luminous intensity, while achieving 1.4mm of the mating height, the lowest* in the industry.

2.

Receptacle connectors mounted on printed circuit boards are of the same shape for both types, which contributes the workability in the mounting process.

3.

The floating structure is adopted in JOINT type, that absorbs misalignment of ±0.1mm along the X-axis and ±0.2mm along the Y-axis of respective connectors (±0.2mm along X-axis and ±0.4mm along Y-axis in total between the connected boards) to improve the contact reliability.

4. Packaged in tape and reel: 3,000 pieces/reel (Receptacle connectors)
5. RoHS compliant product
*Based on research by Kyocera Connector Products Corporation; as of Janualy, 2011
Specification
-Series 9608-
No. of Positions 2, 3 Pos. (Contact us for other pin counts.)
Stacking Height JOINT / JUMPER: 1.4mm, Wire to Board: 1.85mm
Pitch and Applicable Wire Sizes 2.4mm Pitch: AWG #26 to 22 (Coated outer dia. 0.98 to 1.4mm)
1.2mm Pitch: AWG #30 to 28(Coated outer dia. 0.5 to 0.63mm)
Rated Current 3A / Contact (any two positions)
Harness (AWG #24 to 22): 3A / Contact
Harness (AWG #30 to 26): 1A / Contact
Rated Voltage 2.4mm Pitch: AC/DC 250V
1.2mm Pitch: AC/DC 125V
D.W.Voltage AC 500Vrms / min.
Contacting Length Horizontal: 0.8mm
Vertical: 0.4mm
Floating Structure ±0.1mm along the X-axis and ±0.2mm along the Y-axis of respective connectors (±0.2mm along X-axis and ±0.4mm along Y-axis in total between the connected boards)
Creepage Distance of Insulation 3.0mm Min. secured
Contact Material Copper alloy
Insulator Material Heat resistant plastic

-Series 9609-
No. of Positions 1 Pos.
Stacking Height JOINT: 1.4mm, Wire to Board: 3.0mm
Applicable Wire Sizes UL10368 AWG #26 to 22
Rated Current 3A / Contact
Harness (AWG #24 to 22): 3A / Contact
Harness (AWG #26): 1A / Contact
Rated Voltage AC/DC 250V
D.W.Voltage AC 500Vrms / min.
Contacting Length Vertical: 0.3mm
Floating Structure ±0.2mm along the Y-axis of respective connectors (±0.2mm along X-axis and ±0.4mm along Y-axis in total between the connected boards)
Creepage Distance of Insulation 3.0mm Min. secured
Contact Material Copper alloy
Insulator Material Heat resistant plastic

mail
Inquiries about this page
 
Related Link
Series 9608
  Detailed information
Series 9609
  Detailed information
   
 
Top of page
News Release > Series 9608 / 9609 lowest* profile in the industry for LED light and LED backlight is released
Contact us      Terms of use      Privacy      Sitemap     
Copyright, KYOCERA Connector Products Corporation